Heavy Duty Manual Dual Side Sharpener

Heavy Duty Manual Dual Side Sharpener

$14,250.00

Heavy Duty Manual Dual Side Sharpener W350MHDSharpens both sides in one pass!

Share:

Sharpens both sides in one pass!
• Fast SetUp • Accurate Grinds • Flood Coolant

Time saving accuracy is an integral feature of the W350MHD. A massive flood coolant system is built into the machine to assure a uniform temperature at the grinding heads. There is so little change in operating temperature that no warm-up time is required to account for the close comparative tolerances between blade tips. Air actuated saw clamps hold the blade firmly in position while the grinding takes place.
Precision ball bearing spindles, driven by two ¾ H.P. motors, combine to deliver the most accurate grind possible from a manual grinder. Grinding accuracy can be held to ± .0003, provided saw plates are flat and proper wheels are used. Side clearance angles can be controlled
separately as each side of the tooth has its own dial indicator. Initial setup on first tooth takes less than 60 seconds and subsequent tips can be ground in less than 30 seconds. The accuracy of grind and fast setup combine to make the W350MHD the best dollar-for-dollar buy on the market today.

Specifications
Saw Blade Dimensions . Dia. 6″ to 48″
Standard Voltages ………. 230 volts, 3 phase
36″ maximum with negative hook
Spindle Motors ………….. Two, ¾ H.P.
Radial Angle . . . . . . . . . . . . . .  0° to 6°
Air Requirements ………. 2 CFM @ 80 psi
Tangential Angle . . . . . . . . . . . 0° to 5°
Shipping Weight ………. 1000 lbs.
Hook Angle . . . . . . . . . . . . -15° to 45°
Crate Size ………………… 58″ x 49″ x 54″

 

Payments Approx. $13.52 per day! ($270.38 a month)

Weight 1000 lbs
0

TOP

X